Hp Deskjet F4580 All-in-One Printer Manuel d'utilisateur télécharger pdf (Page 49)

Solution 2: Press the On button more slowly

Solution: The product might not respond if you press the On button too quickly.

Press the On button once. It might take a few minutes for the product to turn on. If

you press the On button again during this time, you might turn the product off.

CAUTION: If the product still does not turn on, it might have a mechanical failure.

Unplug the product from the power outlet.

Contact HP support for service.

Go to:

www.hp.com/support. If prompted, choose your country/region, and then

click Contact HP for information on calling for technical support.

Cause: You pressed the On button too quickly.

After setting up the product, it does not print

Try the following solutions to resolve the issue. Solutions are listed in order, with the most

likely solution first. If the first solution does not solve the problem, continue trying the

remaining solutions until the issue is resolved.

•

Solution 1: Press the On button to turn on the product

•

Solution 2: Set your product as the default printer

•

Solution 3: Check the connection between the product and computer

Solution 1: Press the On button to turn on the product

Solution: Look at the On button located on the product. If it is not lit, the product is

turned off. Make sure the power cord is firmly connected to the product and plugged

into a power outlet. Press the On button to turn on the product.

Cause: The product might not have been turned on.

If this did not solve the issue, try the next solution.

Solution 2: Set your product as the default printer

Solution: Use the system tools on your computer to change your product to be the

default printer.

Cause: You sent the print job to the default printer, but this product was not the

default printer.

If this did not solve the issue, try the next solution.

Solution 3: Check the connection between the product and computer

Solution: Check the connection between the product and computer.

Cause: The product and computer were not communicating with each other.

Chapter 9

46 Solve a problem

Solve a problem

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 76 77

Pas de commentaire

Hp Deskjet F4580 All-in-One Printer Manuel d'utilisateur Page 49