HP StorageWorks MSA1000 Guide d'installation télécharger pdf (Page 82)

Configuration Procedures - for Tru64 UNIX Environments

82 MSA1000 Installation Guide

Obtaining the MSA1000 Firmware

To obtain the firmware file:

Note: The firmware filename varies depending on the version number.

1. From Tru64 UNIX, log in as the root user and create a directory for the

MSA1000 firmware:

# mkdir /msa1000

2. Obtain the MSA1000 firmware file by doing one of the following:

■ Go to the Software, Firmware & Drivers page of the MSA1000 website at

http://www.hp.com/go/msa1000

Copy the most recent MSA1000 firmware file to the MSA1000 directory.

Record the firmware file name with the directory in the System

Information Table to complete the pathname.

■ Mount the CD-ROM drive and copy the firmware to the /MSA1000

directory:

MOUNT/OVER=ID <ddcn:>/UNDEFINED_FAT=STREAM_LF:326767

where <ddcn:> is the device name of the CD-ROM on the OpenVMS

system. For example:

DQA0: or DKA400:.

Copy the most recent MSA1000 firmware file to a disk directory on a

system with access to the MSA1000.

# mount -rt cdfs /dev/disk/cdrom0c /mnt

# cp /mnt/<CD-ROM directory>/v3<xxxxx>.bin

/msa1000/v3<xxxxx>.bin

Record the firmware file name with the directory in the System

Information Table to complete the pathname.

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 111 112

Pas de commentaire

HP StorageWorks MSA1000 Guide d'installation Page 82