
Configuring WAN Settings 39
Installation Wizard will prompt you for the required settings.
Configuring WAN
Settings
The Installation Wizard detects if the Firewall has been automatically
allocated an address for its WAN port.
■
If the Firewall has been allocated an IP address then it will attempt to
configure itself automatically. See “Automatic WAN Settings” below.
■
If the Firewall has not been allocated an IP address then it will prompt
you for the settings it requires. See “Manual WAN Settings” on
page 40.
Automatic WAN
Settings
The Installation Wizard checks for the presence of a DHCP Server or a
PPPoEserverontheWANport.Dependingontheserverfoundthe
Firewall configures itself appropriately as described below:
■
DHCP Server — The Firewall requests an IP address form the DHCP
server on the WAN Port and uses the IP address, subnet mask and any
DNS information supplied
■
PPPoE Server — The Installation Wizard prompts you to enter the User
Name and Password supplied by your ISP. See Figure 10 below.
Figure 10
Configuring the Firewall’s PPPoE settings
If the WAN Setup has completed successfully, go to “Configuring LAN
Settings” on page 44.
DUA1611-0AAA02.book Page 39 Thursday, August 2, 2001 4:01 PM
Commentaires sur ces manuels