HP SB40c Manuel d'utilisateur télécharger pdf (Page 12)

Setup 12

• Install the coupler plate on the SB40c.

• Install the SB40c in any device bay on the lower row of the enclosure (9 through 16).

• If the SB40c is installed in an odd-numbered bay, install the partner server blade in the adjacent

even-numbered bay to the right.

• If the SB40c is installed in an even-numbered bay, install the partner server blade in the adjacent

odd-numbered bay to the left.

• When installing the SB40c with a full-height server blade, a half-height server blade can be installed

in the empty bay above the SB40c. This server blade cannot be partnered with the SB40c.

Installing a storage blade

CAUTION: To prevent improper cooling and thermal damage, do not operate the server blade or the

enclosure unless all hard drive and device bays are populated with either a component or a blank.

1. Install the hard drives ("Hard drive options" on page 16).

2. Remove the blank.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 41 42

Pas de commentaire

HP SB40c Manuel d'utilisateur Page 12