HP BL495c Manuel d'utilisateur télécharger pdf (Page 35)

Removal and replacement procedures 35

Press down firmly until the processor installation tool clicks and separates from the processor, and

then remove the processor installation tool.

4. Close the processor retaining bracket and the processor retaining latch.

5. Clean the old thermal grease from the heatsink with the alcohol swab. Allow the alcohol to

evaporate before continuing.

6. Apply all the grease to the top of the processor in one of the following patterns to ensure even

distribution.

CAUTION: The heatsink thermal interface media is not reusable and must be replaced if the

heatsink is removed from the processor after it has been installed.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 58 59

Pas de commentaire

HP BL495c Manuel d'utilisateur Page 35