HP Server tc3100 Spécifications télécharger pdf (Page 35)

Chapter 3 Installing and Configuring

Figure 3-17. Removing the Terminator

8. Lift the terminator out of the socket and place it on an anti-static surface or in a container.

NOTE Keep the terminator for future use. The terminator must be installed in the secondary

processor socket when only one processor is used or the HP Server will not operate

properly.

9. Align the second processor over the empty processor socket. See Figure 3-18.

CAUTION Ensure you align pin-1 of the processor with pin-1 of the processor socket or pin damage

will occur.

10. Insert the second processor into the socket and close the ZIF lever to fully seat the processor.

You should hear the ZIF lever click when it closes properly.

Figure 3-18. Installing Processor

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 110 111

Pas de commentaire

HP Server tc3100 Spécifications Page 35