Hp 2000I G2-Modular-Smart-Array Manuel d'utilisateur télécharger pdf (Page 51)

HP 2000i G2 Modular Smart Array User Guide 51

Is the drive enclosure Fault/Service Required LED amber?

Answer Possible Reasons Actions

No System functioning properly. No action required.

Yes

(blinking)

One of the following errors

occurred:

• Hardware-controlled

power-up error

• Cache flush error

• Cache self-refresh error

• Check the event log for specific information regarding

the fault.

• Isolate the fault.

• Contact an authorized service provider for assistance.

• Replace if necessary.

Yes A fault occurred.

If installing an I/O module

FRU, the module has not gone

online and likely failed its

self-test.

• Check the event log for specific information regarding

the fault.

• Isolate the fault.

• Contact an authorized service provider for assistance.

• Replace if necessary.

• If installing an I/O module FRU, try removing and

reinstalling the new I/O module, and check the event

log for errors.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 71 72

Commentaires sur ces manuels

Pas de commentaire