Hp 8.20q Fibre Channel Switch Manuel d'utilisateur Page 110
- Page / 114
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
110
Fabric name User-defined name associated with the file that contains user list data for the fabric.
Fabric port An F_Port
Fabric view file A file containing a set of fabrics that were opened and saved during a previous QuickTools
session.
Fan Fail LED An LED that indicates that a cooling fan in the switch is operating below standard.
FC Fibre Channel
FCID Fibre Channel address
FDISC Fabric discovery. Discover F_Port Service Parameters.
FDMI Fabric Device Management Interface
Flash memory Memory on the switch that contains the switch control firmware.
Force PROM Mode See Maintenance Mode
Frame Data unit consisting of a start-of-frame (SOF) delimiter, header, data payload, CRC, and an
end-of-frame (EOF) delimiter.
Hard zone A hard zone is a division of the fabric for the purposes of controlling discovery and inbound
traffic.
HBA Host Bus Adapter
Heartbeat LED A switch LED that indicates the status of the internal switch processor and the results of the
Power On Self Test.
IFZ An IFZ (inter-fabric zone) enables controlled and limited access between devices on an HP
SN6000 Fibre Channel Switch (local) fabric and devices on a remote fabric of other vendor
switches. An IFZ contains three WWN members: the local device, the remote device, and the
TR_Port attached to the remote fabric.
Inactive firmware The firmware image on the switch that is not in use.
In-band
management
The ability to manage a switch through another switch over an inter-switch link.
Initiator The device that initiates a data exchange with a target device.
Input Power LED A switch LED that indicates that the switch logic circuitry is receiving proper DC voltages.
Inter-Switch Link The connection between two switches using E_Ports.
ISL Inter-switch link. The connection between two switches using E_Ports.
LIP Loop Initialization Primitive sequence
JDOM An open source Java-based document object model for XML that was designed specifically for
the Java platform to take advantage of its language features.
Logged-in LED A port LED that indicates device login or loop initialization status.
LUN Logical Unit Numbers
Maintenance button Formerly known as the Force PROM button. A momentary button on the switch used to reset the
switch or place the switch in maintenance mode.
- Switch Management User Guide 1
- Contents 3
- 1 Using QuickTools 9
- Opening QuickTools 10
- QuickTools user interface 11
- Fabric tree 12
- Graphic window 12
- Data windows and tabs 12
- Alerts panel 13
- Menu bar 14
- Selecting switches 16
- Selecting ports 16
- Using online help 18
- Viewing the software version 18
- Exiting QuickTools 18
- 2 Managing Fabrics 19
- Replacing a failed switch 20
- Transparent router 20
- TR Mapping Manager dialog 22
- Add TR Mapping dialog 23
- Remote Fabric Zoning dialog 24
- Event Browser 27
- Filtering the Event Browser 29
- Sorting the Event Browser 29
- Devices data window 30
- Creating a nickname 32
- Editing a nickname 32
- Deleting a nickname 32
- Active Zoneset data window 33
- Zoning concepts 34
- Zoning database 35
- Managing the zoning database 36
- Editing the zoning database 37
- Options for resolving zoning 39
- Default Zone 40
- Discard Inactive 40
- Managing zone sets 41
- Managing zones 42
- Copying a zone to a zone set 43
- Adding zone members 43
- Renaming a zone 44
- Removing a zone member 44
- Managing aliases 45
- Merging fabrics and zoning 46
- Zone merge failure 46
- Zone merge failure recovery 46
- 3 Managing Switches 47
- Stack Links data window 52
- Managing switch stacks 53
- Managing user accounts 54
- Creating user accounts 55
- Removing a user account 56
- Paging a switch 58
- Resetting a switch 60
- Configuring a switch 60
- Switch properties 61
- Symbolic name 62
- Switch administrative states 62
- Broadcast support 62
- In-band management 62
- Advanced switch properties 63
- Managing system services 64
- Network properties 65
- Network DNS configuration 67
- SNMP configuration 68
- SNMP v3 Security 70
- Adding an SNMP v3 user 71
- Modifying an SNMP v3 user 72
- Removing an SNMP v3 user 72
- Testing a switch 73
- Archiving a switch 74
- Restoring a switch 75
- Downloading a support file 79
- Installing firmware 79
- Using Call Home 81
- Testing Call Home Profiles 89
- Change Over 89
- 4 Managing Ports 91
- Port Statistics data window 94
- Viewing and configuring ports 97
- Port symbolic name 98
- Port states 98
- Port administrative states 99
- Port types 100
- Port speeds 100
- Port transceiver media status 101
- Resetting a port 102
- Testing ports 103
- 5 Support and Other Resources 105
- Subscription service 106
- Documentation feedback 106
- Contacting HP 106
- Related information 107
- Glossary 109
Produits connexes et manuels pour Stockage Hp 8.20q Fibre Channel Switch
(70 pages)© 2020, manymanuals.fr. Tous droits réservés | 2.148 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels