Hp Compaq StorageWorks TL881 DLT Mini-Library Manuel d'utilisateur télécharger pdf (Page 103)

3-34 Compaq TL881 Minilibrary System Users Guide

8. Press the Enter button. When the Special Configuration Submenu

reappears, turn the power switch off to recycle power.

NOTE: Expansion Unit installation remaps the cartridge slot numbering system as follows:

The 16-slots of the Expansion Unit become slot numbers 0-15. Slots 0-9 of the first

MiniLibrary Base Module become slots 16-25, etc.

A Configuration Example - Setting the SCSI ID

1. Turn the system on, and wait until the Power-On Self Test terminates

and the default screen appears on the display. Figure 3-25 shows a

typical default screen. Yours may vary depending on the number of

modules in your system, as shown in the second line.

SHR-1446

Figure 3-25. Default Screen

2. At the Default Screen, press the Enter button. The display will show the

Main Menu as shown in Figure 3-26:

SHR-1331

Figure 3-26. Main Menu

3. Press the button three times to move the to Configure Menu, then

press the

Enter button. The display will show the Configure Submenu,

as shown in Figure 3-27. Note that the

at the end of the fourth line

means that there are additional configuration options that can be reached

by scrolling with the

button.

1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 199 200

Pas de commentaire

Hp Compaq StorageWorks TL881 DLT Mini-Library Manuel d'utilisateur Page 103