Hp StorageWorks 2.64 Core Switch Manuel d'utilisateur télécharger pdf (Page 33)

Zoning Concepts

33Zoning Version 3.1.x/4.1.x User Guide

Use the zoneCreate command to create a zone using the newly created aliases

from above as shown in this example.

test180_Jr:admin>zoneCreate “fabric_zone1”, “RAID_1_NodeName;

alias by port level”

Use the zoneCreate command to create a zone without using aliases as shown

in this example.

test180_Jr:admin>zoneCreate “fabric_zone2”,

“20:06:0b:00:00:06:9a:d6; 20:06:0b:00:00:06:9a:d7”

Define a Zone Configuration

To define a zone configuration, specify the list of zones to be included and assign

a zone configuration name; the zone configuration name must be a unique

alpha-numeric string beginning with an alpha character. The underscore character

( _ ) is allowed and zone names are case sensitive. For example,

configuration1 is not the same name as Configuration1.

Use the cfgCreate command to create your zone configuration.

test180_Jr.admin> cfgCreate “cfg1”, fabric_zone1; fabric_zone2”

Analyze the Zone Configuration

After creating and saving a zone configuration, HP recommends analyzing the

zone configuration. Doing this will save time and potential issues.

The Zoning Configuration Analyze screen displays a summary of the saved

configuration and warns of zoning conflicts before enabling them. Some potential

errors that might be caught are:

■ Ports/WWN/Devices that are part of the selected configuration but are not part

of the fabric.

■ Zones with a single zone object.

To access the Zoning Configuration Analysis screen, click the Analyze Config

button, in the Zone Administration window in Web Tools.

Enable a Zone Configuration

Use the cfgEnable to enable and save your configuration.

test180_Jr:admin>cfgEnable “cfg1”

Setting switch to Fabric mode,

Committing configuration...done.

zone config “cfg1” is in effect

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 103 104

Pas de commentaire

Hp StorageWorks 2.64 Core Switch Manuel d'utilisateur Page 33