Hp VMA-series Memory Arrays Manuel d'utilisateur télécharger pdf (Page 54)

54 HP VMA SAN Gateway User’s Guide AM456-9026A

Viewing Target Status

On the Target Management page, the details for the highlighted port appear in the panel on the right.

The node, target name, hostname, speed, and address of each type of target port.

To view status information for a target, do the following:

1. Select Manage > Manage Targets. The Target Management page appears, showing

information for all available target ports in one table.

2. To view details on a specific target, select (highlight) the target in the Available Targets panel

on the left.

Managing Transport Protocols

Some target port types are configured automatically when a storage container is created. Other

target ports must be configured manually.

• Fibre Channel target ports are automatically configured when you create the storage containers

on HP VMA Memory Arrays.

To enable target ports, do the following:

1. Select Manage > Manage Targets. The Target Management page appears.

2. Click the appropriate Enable protocol button.

To a disable active target ports, do the following:

1. Select Manage > Manage Targets. The Target Management page appears.

2. In the Manage Target Protocols panel, click the appropriate Disable protocol button.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 264 265

Pas de commentaire

Hp VMA-series Memory Arrays Manuel d'utilisateur Page 54