HP Stream 7 Tablet - 5701 Manuel de service télécharger pdf (Page 25)

Antenna board

Description Spare part number

Antenna (includes WLAN antenna cable and transceiver) 796789-001

Before removing the antenna board, follow these steps:

1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and

then shut it down through the operating system.

2. Disconnect the power from the tablet by unplugging the power adapter cord from the tablet.

3. Disconnect all external devices from the tablet.

4. Remove the back cover (see Back cover on page 13).

5. Remove the mid-frame cover (see Mid-frame cover on page 14).

6. Disconnect the battery (see Battery on page 15).

Remove the antenna board:

1. Disconnect the antenna board cable (1) from the system board.

2. Detach the antenna board (2) from the display panel assembly. (The antenna board is attached to the

display panel assembly with double-sided adhesive.)

3. Remove the antenna board and cable.

Reverse this procedure to install the antenna board.

Antenna board 19

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 42 43

Pas de commentaire

HP Stream 7 Tablet - 5701 Manuel de service Page 25