HP ElitePad 1000 G2 Rugged Tablet Manuel d'utilisateur télécharger pdf (Page 46)

▲

After opening the I/O door at the bottom of the tablet, connect the USB cable for the device to the USB

port.

NOTE: The following illustration might look slightly dierent than your tablet.

You will hear a sound when the device has been detected.

NOTE: The rst time you connect a USB device, a message in the notication area lets you know that the

device is recognized by the tablet.

Removing a USB device

CAUTION: To reduce the risk of damage to a USB connector, do not pull on the cable to remove the USB

device.

CAUTION: To reduce the risk of loss of information or an unresponsive system, use the following procedure

to safely remove the USB device.

1. To remove a USB device, save your information and close all programs associated with the device.

2. Select the remove hardware icon on the Windows desktop in the notication area, at the far right of the

taskbar, and then follow the on-screen instructions.

3. Remove the device.

Using a serial device

A DB9 serial port connects optional devices such as a serial modem, mouse, or printer.

Some serial devices may require additional support software, which is usually included with the device. For

more information about device-specic software, see the manufacturer's instructions.

▲

To connect a serial device, open the I/O door at the bottom of the tablet and then connect the device

cable to the serial port on the tablet.

NOTE: The following illustration might look slightly dierent than your tablet.

36 Chapter 7 External cards and devices

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 80 81

Pas de commentaire

HP ElitePad 1000 G2 Rugged Tablet Manuel d'utilisateur Page 46