HP ProDesk 400 G3 Base Model Small Form Factor PC Manuel d'utilisateur télécharger pdf (Page 31)

8. To install a new expansion card, hold the card just above the expansion socket on the system board then

move the card toward the rear of the chassis (1) so that the bracket on the card is aligned with the open

slot on the rear of the chassis. Press the card straight down into the expansion socket on the system

board (2).

NOTE: When installing an expansion card, press rmly on the card so that the whole connector seats

properly in the expansion card socket.

9. Rotate the slot cover retention latch back in place to secure the expansion card.

10. Connect external cables to the installed card, if needed. Connect internal cables to the system board, if

needed.

11. Recongure the computer, if necessary.

Expansion card 23

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 130 131

Pas de commentaire

HP ProDesk 400 G3 Base Model Small Form Factor PC Manuel d'utilisateur Page 31