HP t5135 Manuel d'utilisateur

Hardware Reference GuideHP Compaq t5135/t5530 Thin Clients

Installing the standTo install the stand:1. Turn unit upside down.2. Locate the slots on the bottom of the unit into which the tabs on the stand fit.3

Using the keyboardFigure 1-6 Keyboard features(1) Caps Lock key Activates/deactivates the Caps Lock feature.(2) Scroll Lock key Activates/deactivates

Windows Logo KeyUse the Windows Logo Key in combination with other keys to perform certain functions available inWindows operating systems.Windows Log

Serial number locationEvery thin client includes a unique serial number located as shown in the following illustration. Have thisnumber available when

2 Hardware changesGeneral hardware installation sequenceTo ensure the proper installation thin client hardware components:1. Back up any data, if nece

NOTE You can download select hardware drivers from HP at http://www.hp.com/country/us/eng/support.html.8. Reconfigure the thin client, if necessary.EN

Installing USB devices in the secure USB compartmentThe secure USB compartment allows you to install two USB devices in a secure location inside of th

Installing the USB device▲Insert the USB device into the USB port in the secure USB compartment. See the followingillustration for the location of the

Replacing the batteryBefore beginning the replacement process, review General hardware installation sequence forprocedures you should follow before an

2. Lift the metal side cover up and off the unit (2).Figure 2-5 Removing the metal side coverRemoving and replacing the batteryTo remove and replace

© Copyright 2006 Hewlett-PackardDevelopment Company, L.P. Theinformation contained herein is subject tochange without notice.Microsoft and Windows are

2. Insert and tighten the three screws.Figure 2-7 Replacing the metal side coverTo replace the access panel:1. Place the access panel on the side of

3 SpecificationsTable 3-1 HP Compaq t5135/t5530 Thin ClientDimensionsWidth (front to back)Height (top to bottom)Depth7.31 in.7.31 in2.06 in.18.57 cm1

Power Output (maximum) 40 W 40 WRated Output Current (maximum) 3.3 A 3.3 ATable 3-1 HP Compaq t5135/t5530 Thin Client (continued)16 Chapter 3 Speci

4 Security provisionsSecuring the thin clientThe HP Compaq t5135/t5530 thin client is designed to accept a security cable lock. This cable lockprevent

5 Mounting the thin clientHP Quick ReleaseThe HP Compaq t5135/t5530 thin client incorporates four mounting points on each side of the unit.These mount

To use the HP Quick Release with a VESA-configured thin client:1. Using four 10 mm screws included in the mounting device kit, attach one side of the

3. Slide the side of the mounting device attached to the thin client (1) over the other side of themounting device (2) on the device on which you want

●You can mount the thin client on the back of a flat panel monitor stand.Figure 5-6 Thin client mounted on back of monitor stand●You can mount the th

Figure 5-8 Thin client mounted under deskNon-supported mounting optionCAUTION Mounting a thin client in an non-supported manner could result in failu

6 Thin client operationRoutine thin client careUse the following information to properly care for your thin client:●Never operate the thin client with

About This BookWARNING! Text set off in this manner indicates that failure to follow directions could result inbodily harm or loss of life.CAUTION Tex

Figure 6-2 Horizontal orientation●You can lay the thin client under a monitor stand with at least one inch of clearance.Figure 6-3 Under monitor sta

Figure 6-4 Do not put thin clients in drawers or other sealed enclosuresENWW Non-supported orientation 25

7 Electrostatic dischargeA discharge of static electricity from a finger or other conductor may damage system boards or otherstatic-sensitive devices.

Grounding methodsThere are several methods for grounding. Use one or more of the following methods when handling orinstalling electrostatic-sensitive

8 Shipping informationShipping preparationFollow these suggestions when preparing to ship the thin client:1. Turn off the thin client and external dev

iv About This Book ENWW

Table of contents1 Product featuresStandard features ...

Non-supported orientation ... 247 Elec

1 Product featuresStandard featuresThank you for purchasing an HP Compaq thin client. We hope you have years of use from our t5135 ort5530 thin client

Front panel componentsFigure 1-1 Front panel components(1) Secure USB compartment (5) Line-out (headphone) audio connector(2) Power button (6) Line-i

Rear panel componentsFigure 1-3 Rear panel components(1) Cable lock slot (5) PS/2 connectors (2)(2) Ethernet RJ-45 connector (6) Monitor connector(3)