HP 110 Wireless-N Router Series Manuel d'utilisateur Page 125

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 182
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 124
VPN 123
Figure 100 Add new PPTP VPN Tunnel Screen
1 Set the Tunnel Type to PPTP.
2 Enter a descriptive name for the tunnel in the Tunnel Name field.
3 Enter the User name and Password.
4 Enter the Idle Timeout value.
5 Set the PPTP Type Setting to PPTP Server, or PPTP Client.
if you set the type as PPTP Client, then set the Local Type Setting to
Network or Host, then enter the Remote Server IP. Check the Auto
reconnect box, if you want to auto-reconnect after disconnection.
if the PPTP Type Setting is set to PPTP Server, go to step 6.
6 Check the box to enable the Remote Network Setting, and then enter the
Remote Network Address, and Remote Subnet Mask information.
7 When the PPTP Type Setting is set to PPTP Client, you would then need to
enter the Pre-shared Key information.
8 Click Apply.
Vue de la page 124
1 2 ... 120 121 122 123 124 125 126 127 128 129 130 ... 181 182

Commentaires sur ces manuels

Pas de commentaire