HP hn200w Manuel d'utilisateur télécharger pdf (Page 63)

DHCP

A Dynamic Host Configuration Protocol (DHCP) server automatically assigns IP

addresses to each computer on a network. Unless you already have a DHCP server

on your network, it is highly recommended that your Gateway be set up as a DHCP

server.

Select the DHCP tab of the Expert Interface to view the DHCP screen.

❑ DHCP Server: Select Enable to enable the Gateway’s DHCP server option. If

you already have a DHCP server on your network, select Disable. If you

disable DHCP, remember to assign a static IP address that is in your local

subnet.

❑ Starting IP Address: Enter an initial IP address (or accept the default) for the

DHCP server when issuing IP addresses. Since the default IP address for your

DHCP Screen

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 93 94

Pas de commentaire

HP hn200w Manuel d'utilisateur Page 63