HP SCANJET N6010 Manuel d'utilisateur télécharger pdf (Page 7)

● PDF Settings tab

● Maintenance tab

Buttons tab

You can use the Scanner Tools Utility to change the default scan applications used by

the front-panel buttons. Use the steps that follow to change the default application for

any of these buttons:

1. Select the Buttons tab.

2. Select the drop-down box for the button that you want to change. The buttons are

numbered 1 through 4 as follows:

–

1: Scan Document button (

)

–

2: Copy button (

)

– 3: Scan to PDF button (

)

– 4: Scan Business Card button (

)

The drop-down box for each button is automatically populated with the scanning

applications on your computer that support scanning from hardware device buttons.

3. Click OK to save the new button mappings.

To change the default behavior of the Copy button, so that the HP Document Copy utility

prompts for settings before continuing with the copy, clear the Copy to printer... check

box on the Buttons tab, and then click OK.

To prevent buttons from being accidentally pushed, you can also use the Scanner Tools

Utility to disable the front-panel buttons.

To disable the front-panel buttons, select the Disable scanner buttons check box on

the Buttons tab, and then click OK. This disables all of the front-panel buttons except

for the Cancel button. After disabling the front-panel buttons, you must use the Start

button or the desktop icon to open the Scanner Tools Utility.

PDF Settings tab

Use the PDF Settings tab of the Scanner Tools Utility to configure the settings that are

used to scan originals and create PDFs using the Scan to PDF front-panel button.

In the Scan settings area of the PDF Settings tab, configure the default settings for

resolution, color or black and white, page size, and single- or double-sided scanning.

User Guide 5

1 2 3 4 5 6 7 8 9 10 11 12 ... 31 32

Pas de commentaire

HP SCANJET N6010 Manuel d'utilisateur Page 7