HP M175a Guide de démarrage rapide télécharger pdf (Page 8)

8. Grasp the print cartridge by the center

handle and insert into the product.

NOTE: Compare the color label on the

print cartridge to the color label in the

carousel slot to make sure the print

cartridge color matches the carousel

position.

CAUTION: If toner gets on your clothing,

wipe it off with a dry cloth and wash the

clothing in cold water. Hot water sets toner

into the fabric.

9. Close the print cartridge door.

NOTE: After closing the print cartridge

door, the control panel shows the

Calibrating... message. Allow a few

minutes for the product to calibrate.

NOTE: If replacing another print

cartridge, you must close the print cartridge

door before pressing the Cartridge

button of the next print cartridge.

You do not need to wait for the product to

calibrate when replacing the second print

cartridge. Instead, press the Cartridge

button to rotate the carousel into position.

After you have replaced the print

cartridges, the product calibrates.

NOTE: When printing, if you receive the status alert message Wrong Cartridge in <Color> Slot,

remove the print cartridge from the specified slot and compare the color label on the print cartridge to the

color label in the slot to determine the correct print cartridge for the slot.

8 Quick Reference Guide ENWW

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 17 18

Pas de commentaire

HP M175a Guide de démarrage rapide Page 8