HP StorageWorks Disk System 2100 (fld rck 0 drvs) Manuel d'utilisateur télécharger pdf (Page 16)

HP StorageWorks Disk System 2100 / 211016

Connecting the Power Cable

FIGURE 9

AC Power Connector Location

Powering On and Off

Power On the Disk System

1 Press the power button and release it. The power button will stay in a depressed

position, indicating that the power is on.

See Figure 10 on page 17 for the location of the power button.

2 Confirm that the disk system is running properly by checking the system power

LED and the disk module LEDs at the front of your disk system. A system reboot

may be necessary to assure that the host system recognizes the disk drives within

the disk system.

Refer to “Front Panel” on page 3 for explanations of the LED functions and their

meanings.

Ensure that the connection of multiple units to the supply circuit does not

overload the supply overcurrent protection or the supply wiring. Refer to

the storage electrical ratings when determining the correct branch circuit

rating for your installation. See Table 3 on page 11.

CAUTION

Power

Connector

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 41 42

Pas de commentaire

HP StorageWorks Disk System 2100 (fld rck 0 drvs) Manuel d'utilisateur Page 16