HP Printer 800 Manuel d'utilisateur Page 92

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 246
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 91
Solving Problems
Image Quality
Problems
Ink Supply
Problems
Media Problems
Image Error Other Problems Getting Help
Media & InkIntroduction Front Panel Other
Printer
Options
Index
Solutions
Removing jammed paper
1. Open the window.
2. Switch the printer off at the front.
3. If necessary, carefully move the printhead carriage out of the wayif possible all the way to the enclosed area on
the left or the right. Which way you are able to move it depends on where the paper is jammed.
CAUTION: When moving the printhead carriage, touch only the black plastic parts.
4. If necessary, carefully move the paper cutter out of the way to the left, or
to the right depending on where the paper is jammed (though if moved
right it may block the paper path).
CAUTION: The cutter is easily moved by holding it as close as possible
to the guide running across the width of the printer. Be
careful not to touch the metal slider bar that runs across the
printer.
5. If necessary, lift the blue paper lever, to release any trapped paper.
Remember to lower it again when you have finished.
6. Carefully remove any of the jammed paper which you can easily lift up and out from the top of the printer.
7. Carefully pull the rest of the roll or sheet down and out of the printer. You may need to cut the edge of the roll with
scissors.
8. Check that the printing zone, including the cutter guide, the paper path, and the area where the
printhead carriage is parked, is clear and clean; remove any paper powder by brushing it away
or with a vacuum cleaner.
More
Slider bar
Guide
Vue de la page 91
1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 245 246

Commentaires sur ces manuels

Pas de commentaire