Hp Officejet 6100 Manuel d'utilisateur télécharger pdf (Page 20)

3. If the media is too long, lift the latch on the front of the tray and lower the front of

the tray.

4. Insert the media print-side down along the right edge of the main tray. Make sure

the stack of media aligns with the right and back edges of the tray and does not

exceed the line marking in the tray. If the photo paper has a tab along one edge,

make sure the tab is pointing towards the front of the printer.

NOTE: Do not load cards or photo paper while the printer is printing.

5. Slide the media guides in the tray to adjust them for the media size that you have

loaded.

6. Lower the output tray.

7. Pull out the tray extender.

Load custom-size media

To load cards and photo paper

Use these instructions to load custom-size media.

CAUTION: Use only custom-size media that is supported by the printer. For more

information, see

Media specifications.

1. Lift the output tray.

2. Slide the paper width guide out as far as possible.

Chapter 1

16 Get started

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 137 138

Pas de commentaire

Hp Officejet 6100 Manuel d'utilisateur Page 20