Hp XP P9500 Storage Manuel d'utilisateur Page 180
- Page / 192
- Table des matières
- DEPANNAGE
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
DescriptionItem
• Communication Time Out. This status indicates one of the following:
A timeout error has occurred between the primary and the secondary systems.◦
◦ A logic error is detected between the primary and the secondary systems.
• Port Rejected. The local system rejected configuration of the logical path connection. Logical
path resources in the local system might be in use for other connections.
• Pair Port Rejected. The remote system rejected configuration of the logical path connection.
Logical path resources in the remote system might be in use for other connections.
• Serial Number Mismatch. The serial number of the system connected to this logical path
does not match the serial number specified by the Add DKC dialog box.
• Invalid Port Mode. The port is not an initiator port.
• Pair-Port Number Mismatch. Indicates one of the following:
◦ The specified port number is incorrect.
◦ The port in the remote system is physically disconnected from the local system.
• Pair-Port Type Mismatch. The port on the remote system is not an RCU target port.
• Communication Failed. A communication timeout error has occurred on the path between
the local and remote systems.
The port on the local system.Port
The port on the remote system.Pair-Port
The serial number and LDKC number of the remote system.S/N
The controller ID and model name (in parenthesis) for the remote system.Controller ID
The path group IDPath Gr. ID
The type of channel interface between local and remote systems. Always displays column
displays “Fibre”.
M-R Path
The minimum possible number of paths between the local and the remote systems.Minimum Paths
The remote I/O missing interrupt handler timer value—the wait time for data transfer from the
local to remote system to complete.
RIO MIH
The date and time when local and remote systems were associated to each otherDKC Registered
The date and time the last operation on a logical path to the remote system was performed.Last Updated
When clicked, the DKC Operation window refreshes when it re-displays.Refresh the DKC
Operation tab after
this panel is closed
Add DKC dialog box
Use this dialog box to configure local and remote systems for Continuous Access Journal pairs.
See “Configuring local and remote systems for Cnt Ac-J ” (page 45) for complete information.
180 GUI reference
- User Guide 1
- Contents 3
- 4 Contents 4
- Contents 5 5
- 6 Contents 6
- Contents 7 7
- P9500 storage systems 10
- Pair volumes 11
- Journal volumes 11
- Journals 11
- Reference Information 12
- Differential data management 13
- S-VOL write option 14
- Pair status 14
- System requirements 15
- Plan and design workflow 18
- Write-workload 19
- Sizing journal volumes 20
- Planning journals 20
- RAID group configuration 21
- Planning journal volumes 22
- Planning pair volumes 22
- Planning pair volumes 23 23
- Host failover software 25
- Planning for previous models 29
- System option modes 31
- 4 Planning the data path 34
- Calculating bandwidth 35
- 36 Planning the data path 36
- Sizing bandwidth 37 37
- 38 Planning the data path 38
- Packet loss 39
- Example configuration 40
- Port types 40
- Additional switches 41
- 42 Planning the data path 42
- 5 Configuration operations 44
- 46 Configuration operations 46
- 48 Configuration operations 48
- 50 Configuration operations 50
- 52 Configuration operations 52
- 6 Pair operations 54
- Creating the initial copy 55 55
- 56 Pair operations 56
- Creating the initial copy 57 57
- Splitting pairs 58
- Splitting mirrors 59
- Creating point-in-time copies 60
- Resynchronizing pairs 60
- Resynchronizing pairs 61 61
- Resynchronizing mirrors 62
- Deleting pairs 62
- Deleting pairs 63 63
- Deleting pairs in a mirror 64
- Deleting pairs in a mirror 65 65
- 7 Monitoring the system 66
- PSUS types and behaviors 69
- PSUE types and behaviors 71
- Selecting data to be graphed 74
- Manipulating graph, save data 76
- History of pair operations 79
- 8 Maintaining the system 80
- ◦ Initial 81
- ◦ Stopped 81
- ◦ Hold(Failure) 81
- 82 Maintaining the system 82
- 84 Maintaining the system 84
- Logical path maintenance 86
- Deleting logical paths 87
- When power stops unexpectedly 88
- 90 Maintaining the system 90
- General recovery procedures 91
- Cnt Ac-J secondary site: HOLD 100
- 10 Troubleshooting 103
- Troubleshooting logical paths 105
- B9E2, B9E4, D004 109
- B9E4, D004 112
- Miscellaneous troubleshooting 121
- 122 Troubleshooting 122
- Contacting HP 123
- Related information 123
- Typographic conventions 124
- Overview 126
- Failure recovery 127
- B Sharing volumes 133
- Cache Residency 135
- Data Retention 135
- Thin Provisioning 136
- LUN Expansion 137
- LUN Manager 137
- Fast Snap and Snapshot 137
- 138 Sharing volumes 138
- Virtual LUN 139
- Auto LUN 140
- 3DC cascade configuration 141
- Delta resync configuration 144
- ◦ Use the same mirror ID 146
- Problems that can occur 148
- ◦ Assign it to other mirrors 149
- ◦ Use it with RAID Manager 149
- 2 Data center configuration 151
- Pair status and data currency 156
- E GUI reference 157
- Journal Detail window 159
- Pair Operation window 165
- Paircreate dialog box 169
- Pairsplit-r dialog box 171
- Pairresync dialog box 172
- Pairsplit-S dialog box 173
- Change Pair Option dialog box 174
- Display Filter dialog box 174
- DKC Operation window 175
- Remote systems information 176
- Logical Path Information 177
- DKC Status dialog box 179
- Add DKC dialog box 180
- DKC Option dialog box 181
- Usage Monitor window 182
- History window 183
- Operations in History window 184
- History window notes 185
- Optional Operation window 186
- Glossary 188
- 190 Index 190
- 192 Index 192
Produits connexes et manuels pour Stockage Hp XP P9500 Storage
Stockage Hp XP7 Storage Manuel d'utilisateur
(304 pages)
(304 pages)
Stockage Hp Surestore NAS Manuel d'utilisateur
(110 pages)
(110 pages)
© 2020, manymanuals.fr. Tous droits réservés | 0.955 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels