HP C-Series Manuel d'utilisateur télécharger pdf (Page 12)

C-Series configuration steps

12 Fabric Interoperability: Merging Fabrics Based on C-Series and B-Series Fibre Channel Switches Application Notes

MDS9509# show zoneset active

zoneset name mdscore vsan 1

zone name vz1 vsan 1

* fcid 0x630500 [pwwn 50:06:01:60:88:02:90:cb]

* fcid 0x610400 [pwwn 10:00:00:00:c9:24:3d:90]

zone name vz2 vsan 1

* fcid 0x630400 [pwwn 10:00:00:00:c9:24:3f:75]

* fcid 0x6514e2 [pwwn 21:00:00:20:37:a7:ca:b7]

* fcid 0x6514e4 [pwwn 21:00:00:20:37:a7:c7:e0]

* fcid 0x6514e8 [pwwn 21:00:00:20:37:a7:c7:df]

zone name vz3 vsan 1

* fcid 0x651500 [pwwn 10:00:00:e0:69:f0:43:9f]

* fcid 0x6105dc [pwwn 21:00:00:20:37:28:31:6d]

* fcid 0x6105e0 [pwwn 21:00:00:20:37:28:24:7b]

* fcid 0x6105e1 [pwwn 21:00:00:20:37:28:22:ea]

* fcid 0x6105e2 [pwwn 21:00:00:20:37:28:2e:65]

* fcid 0x6105e4 [pwwn 21:00:00:20:37:28:26:0d]

zone name $default_zone$ vsan 1

Verify Proper Zone Naming

Ensure that zone names adhere to the following guidelines.

■ All characters must be ASCII

■ A name must be between 1 and 64 characters in length

■ The first character of a name must be a letter. A letter is defined as either an uppercase

[A-Z] or lower case [a-z] character

■ Any character other than the first character must be either a lower case character [a-z] or

an upper case character [A-Z] or a number [0-9] or the symbol (_).

Configure Zones using only PWWNs

In the interoperability mode all the zone members must be defined using port WWNs only and

defining them in any other way is not supported. For example, we can not define zones using

FC port addresses or domain, port combinations etc. If there are any zones not defined as

stated above, redefine them using proper PWWNs.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 27 28

Pas de commentaire

HP C-Series Manuel d'utilisateur Page 12