HP Elite 7100 Microtower PC Manuel d'utilisateur télécharger pdf (Page 11)

Removing Bezel Blanks

On some models, there are bezel blanks covering the 3.5-inch and 5.25-inch external drive bays that

need to be removed before installing a drive.

1. Remove the front bezel.

2. To remove the lower 5.25-inch bezel blank, gently twist and pull on the bezel blank until it breaks

free from the front bezel (1), then discard the bezel blank. If the blank needs to be replaced at a

later date, you can order a replacement blank from HP.

3. To remove the 3.5-inch bezel blank, press the two retaining tabs towards the outer left edge of the

bezel (2) and pull the bezel blank inwards to free it from the front bezel (3).

Figure 4 Removing a Bezel Blank

4. Replace the front bezel.

ENWW Removing Bezel Blanks 5

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 43 44

Pas de commentaire

HP Elite 7100 Microtower PC Manuel d'utilisateur Page 11