Hp Integrity BL870c i2 Server-Blade Manuel d'utilisateur télécharger pdf (Page 41)

Command line 41

Item Description

[ConnectionMode=<Auto|Failover>]

[VLanTunnel=<Enabled|Disabled>]

[PrefSpeedType=<Auto|Custom>] [PrefSpeed=<100Mb–10Gb in

100Mb increments] [MaxSpeedType=<UnRestricted|Custom>]

[MaxSpeed=<100Mb–10Gb in 100Mb increments>]

Parameter

NetworkName

(required)

The unique name of the new network to create

Option

Quiet

Suppresses user confirmation prompts during network creation and modification.

This option is used mainly in automated scripting scenarios.

Properties

UplinkSet

(optional)

The name of an existing shared uplink port set to use with this new network. If this

property is specified, then a valid VLAN ID must also be provided. The limit is 32

networks per shared uplink set.

VLanID

(optional)

The VLAN ID associated with the network (used with shared uplink port set only).

The VLAN ID is a valid number between 1 and 4094.

State (optional)

Enables or disables the network. Valid values are "Enabled" and "Disabled". The

default value is "Enabled".

NativeVLAN

(optional)

Enables or disables the network to act as a native VLAN. Valid values are

"Enabled" and "Disabled". The default value is "Disabled". This property can be

specified only if the network is a shared network.

Private

(optional)

Enables or disables the network to act as a private network. Valid values are

"Enabled" and "Disabled". The default value is "Disabled".

ConnectionMode

(optional)

Specifies the connection type that is formed when multiple ports are added to the

network. Valid values include "Auto" and "Failover". The default value is "Auto".

VLanTunnel

(optional)

Enables or disables VLAN tag tunneling. If enabled, VLAN tags are passed through

the domain without any modification. If disabled, all tagged frames are discarded.

If multiple networks are configured on any server port, this option cannot be

modified.

PrefSpeedType

(optional)

Default connection speed for any Ethernet connection attached to this network.

Valid values include "Auto" and "Custom". "Custom" enables the user to configure

the preferred speed. The default value is "Auto".

PrefSpeed

(required if

PrefSpeedType is

"Custom")

The connection speed for any Ethernet connection attached to this network. Valid

values range from 100Mb to 10Gb in 100Mb increments.

MaxSpeedType

(Optional)

The maximum connection speed for any Ethernet connection attached to this

network. Valid values include "Unrestricted" and "Custom". "Custom" enables the

user to configure the preferred speed. The default value is "Unrestricted".

MaxSpeed

(required if

MaxpeedType is

"Custom")

The maximum connection speed for any Ethernet connection attached to this

network. Valid values range from 100Mb to 10Gb in 100Mb increments.

Examples

->add network MyNewNetwork

Creates a new network, and then adds it to the domain

->add network MyNewNetwork2 UplinkSet=MyUplinkSet VLanID=145

Creates a new network and uses a shared uplink port set

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 116 117

Commentaires sur ces manuels

Pas de commentaire

Hp Integrity BL870c i2 Server-Blade Manuel d'utilisateur Page 41

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel informatique Hp Integrity BL870c i2 Server-Blade