Hp Integrity NonStop J-Series Manuel d'utilisateur télécharger pdf (Page 69)

M8605A and M8606A ACL Tape Drive Installation and User’s Guide—546012-002

B-1

Configuring the ACL Tape Drive for

the NonStop BladeSystem Server

This section covers:

Configuration Overview

NonStop BladeSystems can connect to the tape drive by means of a CLIM

(CLuster I/O Module). Each CLIM provides access to the tape drive through a

Fibre Channel port.

For more information on connecting tape drives to the CLIM, see the NonStop

CLuster I/O Module (CLIM) Installation and Configuration Guide.

For a list of tape drives supported for use with Blades-series servers, see the

NonStop BladeSystem Installation Manual.

Adding the Tape Drive

To configure a tape drive connected to the CLIM, issue an SCF ADD TAPE

command. This is an example:

-> ADD TAPE $M8605A, SENDTO STORAGE, CLIM C1002531, LUN 1

You can specify backup and primary CPUs if you need to balance the

processing load to other CPUs.

Configuration Overview B-1

Adding the Tape Drive B-1

Start the Tape Drive B-2

Verify the Tape Configuration B-2

Troubleshoot the Tape Configuration B-3

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 79 80

Pas de commentaire

Hp Integrity NonStop J-Series Manuel d'utilisateur Page 69