Hp Integrity NonStop J-Series Manuel d'utilisateur télécharger pdf (Page 18)

Operation

5344 Tape Drive Installation and User’s Guide—546011-001

3-4

Front Panel

TAPE FLASHES

The drive believes the current

tape or the tape just ejected is

faulty.

Unload the tape cartridge. Make

sure that you are using the correct

format cartridge.

Reload the cartridge. If the Tape

LED still flashes or starts flashing

during the next backup, load a

new or known good cartridge.

If the Tape LED is now off, discard

the ’suspect’ tape cartridge. If it is

still on, call for service.

DRIVE FLASHES

The drive mechanism has

detected an error.

Load a new cartridge. If the error

persists, power cycle or reset the

drive.

If the Drive LED remains on, call

for service.

DRIVE, TAPE, AND

READY FLASH

There is a firmware download

problem.

Insert a cartridge to clear the LED

sequence. If the condition persists,

call for service.

Table 3-1. Tape Drive LEDs

LED Sequence Cause Action Required

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 39 40

Pas de commentaire

Hp Integrity NonStop J-Series Manuel d'utilisateur Page 18