Hp Integrity NonStop J-Series Manuel d'utilisateur télécharger pdf (Page 31)

5344 Tape Drive Installation and User’s Guide—546011-001

B-1

Configuring the Tape Drive for the

NonStop BladeSystem Server

This section covers:

Configuration Overview

NonStop BladeSystems can connect to the tape drive by means of a CLIM

(CLuster I/O Module). Each CLIM provides access to the tape drive through a

Fibre Channel ports.

For more information on connecting tape drives to the CLIM, see the NonStop

CLuster I/O Module (CLIM) Installation and Configuration Guide.

For a list of tape drives supported for use with Blades-series servers, see the

NonStop BladeSystem Installation Manual.

Adding the Tape Drive

Issue an SCF ADD TAPE command to configure the tape drive. This is an

example:

-> ADD TAPE $5344, SENDTO STORAGE, CLIM C1002531, LUN 1

You can specify backup and primary CPUs if you need to balance the

processing load to other CPUs.

Configuration Overview B-1

Adding the Tape Drive B-1

Start the Tape Drive B-2

Verify the Tape Configuration B-2

Troubleshoot the Tape Configuration B-3

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 39 40

Pas de commentaire

Hp Integrity NonStop J-Series Manuel d'utilisateur Page 31