Hp Integrity rx4610 Server Manuel d'utilisateur télécharger pdf (Page 81)

Chapter 7 Installing Accessory Boards

9. Be sure that the plastic PCI hot plug (PHP) mechanism that secures the end

of the board nearest the rear of the chassis is in the open position. If not,

press the center of the PHP until it clicks open and then rotate the

mechanism downward from outside the chassis.

Figure 7-2. Open the PCI PHP Mechanism Securing the Board at the Rear of

the Chassis

10. If you are adding a new board, remove the perforated rear panel cover in

the slot you’re using by pushing it out from inside the chassis.

11. Press the PCI board down firmly until it seats in its slot.

CAUTION Some accessory/option board outputs exceed Class 2 or

limited power source limits and must use appropriate

interconnecting cabling in accordance with the national

electric code during installation.

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 248 249

Pas de commentaire

Hp Integrity rx4610 Server Manuel d'utilisateur Page 81