Hp Netserver E Server series Manuel d'utilisateur télécharger pdf (Page 28)

Chapter 4 Accessories

14. Press the Escape key to return to the ISA Non-Plug-and-Play Boards.

15. Use the down arrow key to select the Interrupt Resources option from the

menu, and press the Enter key.

16. Use the up and down keys to select the IRQ that corresponds to the IRQ

required for the board you are installing, and press the F7 or F8 key to

reserve that IRQ. Reserve all IRQs needed for the board.

NOTE Each board must use a unique IRQ. No two boards may use

the same IRQ.

Reserve IRQs for all remaining ISA non-Plug-and-Play boards you are

installing.

17. Press the Escape key several times to exit the Setup utility. When the Save

Changes and Exit dialog displays on the screen, press the Enter key. The

NetServer will reboot.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 85 86

Pas de commentaire

Hp Netserver E Server series Manuel d'utilisateur Page 28