Hp NonStop G-Series Manuel d'utilisateur télécharger pdf (Page 141)

Troubleshooting

Mid-Range Silo Media Manager Installation and User’s Guide—541530-003

C-7

Example 7

PROBLEM:

I installed MSMM version 5 and now the GUI is not showing all of the tape drives...

SOLUTION:

This may happen if you are using a 9710 or 9740 silo. The problem is that most likely

the firmware of the silo is below 2.00.02. For MSMM version 5 or above, the silo

should have no less than 2.00.02 on it. Check the version of firmware on the silo via

the control panel on the silo or by viewing the MSMM GUI Main tab with a silo

connected [should read at least 2XXX]. Please upgrade or let us know and we will

send the firmware to you and instructions on how to do it.

Example 8

PROBLEM:

When I choose PING from the MSMM GUI, I receive a HOST NOT FOUND error...

SOLUTION:

The problem is the name you are trying to ping is not in your HOSTS file on your

workstation. It does not use a DNS. Either use an IP number or put the host in your

HOSTS file with the IP number.

1 2 ... 136 137 138 139 140 141 142 143 144 145 146 ... 209 210

Pas de commentaire

Hp NonStop G-Series Manuel d'utilisateur Page 141