Hp ProLiant BL480c Server-Blade Manuel d'utilisateur télécharger pdf (Page 25)

Hardware options installation 25

Prepare the hard drive.

3. Install the hard drive.

4. Determine the status of the hard drive from the hot-plug hard drive LEDs ("SAS and SATA hard drive

LEDs" on page 8).

5. Resume normal server blade operations.

Processor option

WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and

the internal system components to cool before touching them.

CAUTION: To avoid damage to the system board:

• Do not touch the processor socket contacts.

• Always install the processor socket cover after removing the processor from the socket.

• Do not tilt or slide the processor when lowering the processor into the socket.

CAUTION: To avoid damage to the processor:

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 95 96

User Guide 1
Audience assumptions 2
Contents 3
Contents 4 4
Contents 5 5
Component identification 6
Front panel LEDs 7
SAS and SATA hard drive LEDs 8
System board components 9
FBDIMM slot numbering 10
System maintenance switch 10
Accessing the redundant ROM 11
Repeat steps 5 and 6 12
Local I/O cable 13
Operations 14
Remove the server blade 15
Remove the access panel 15
Install the access panel 16
In this section 17
Installing a server blade 18
Remove the blank 19
Setup 20 20
Remove the connector covers 21
Connecting to the network 23
Completing the configuration 23
Introduction 24
Processor option 25
Memory option 32
Installing FBDIMMs 35
Mezzanine card option 36
Cabling 39
Network-based PXE deployment 43
Deployment methods 44
PXE deployment 45
CD-ROM deployment 45
Diskette image deployment 46
SAN configuration 47
Configuration tools 48
Using RBSU 49
Auto-configuration process 49
Boot options 49
Array Configuration Utility 50
Management tools 52
HP Systems Insight Manager 53
Management Agents 53
Redundant ROM support 54
Diagnostic tools 55
Integrated Management Log 56
Array Diagnostic Utility 56
Web-Based Enterprise Service 56
Keeping the system current 57
Care Pack 58
Troubleshooting 59
Important safety information 60
Symptom information 61
Service notifications 62
Loose connections 62
Troubleshooting flowcharts 62
Start diagnosis flowchart 63
General diagnosis flowchart 64
Symptoms: 65
POST problems flowchart 67
OS boot problems flowchart 68
Troubleshooting 70 70
Possible causes: 71
Redundancy failure 71
Troubleshooting 72 72
Battery replacement 73
FCC rating label 74
FCC logo, United States only 75
Modifications 76
Japanese notice 77
BSMI notice 77
Korean notice 78
Laser compliance 78
Battery replacement notice 78
Electrostatic discharge 80
Specifications 81
Technical support 82
Customer Self Repair 84
Technical support 85 85
Reparo feito pelo cliente 86
Technical support 87 87
Technical support 88 88
Technical support 89 89
Acronyms and abbreviations 90
Version Control Agent 93
Wired for Management 93
Index 94 94
Index 95 95
Index 96 96

Commentaires sur ces manuels

Pas de commentaire

Hp ProLiant BL480c Server-Blade Manuel d'utilisateur Page 25

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel informatique Hp ProLiant BL480c Server-Blade