Hp ProLiant BL480c Server-Blade Manuel d'utilisateur télécharger pdf (Page 39)

Cabling 39

Cabling

In this section

Using the local I/O cable........................................................................................................................ 39

Connecting locally to a server blade with video and USB devices................................................................ 39

Using the local I/O cable

The local I/O cable enables the user to perform server blade administration, configuration, and

diagnostic procedures by connecting video and USB devices directly to the server blade. For local I/O

cable connectors, see "Local I/O cable (on page 13)."

Connecting locally to a server blade with video and USB

devices

Use the local I/O cable to connect a monitor and any of the following USB devices:

• USB hub

• USB keyboard

• USB mouse

• USB CD/DVD-ROM drive

• USB diskette drive

Numerous configurations are possible. This section offers two possible configurations. For more

information, see "USB support and functionality (on page 54)."

Accessing a server blade with local KVM

CAUTION: Before disconnecting the local I/O cable from the connector, always squeeze the release

buttons on the sides of the connector. Failure to do so can result in damage to the equipment.

NOTE: For this configuration, a USB hub is not necessary. To connect additional devices, use a USB hub.

1. Connect the local I/O cable to the server blade.

2. Connect the video connector to a monitor.

3. Connect a USB mouse to one USB connector.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 95 96

Pas de commentaire

Hp ProLiant BL480c Server-Blade Manuel d'utilisateur Page 39