Hp ProLiant DL380e Gen8 Server Manuel d'utilisateur Page 41

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 142
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 40
Hardware options installation 41
c.
Connect the SATA cable to the rear drive cage, secure the cable in the cable clip, and then connect
the cable to the system board.
d. Install the primary PCI riser cage ("Install the PCI riser cages" on page 26).
e. To continue with the installation procedure, go to step 12.
11. Connect the longer SATA and sideband signal cables to the front drive cage backplane:
a. Connect the SATA and sideband signal cables to the rear drive cage.
b. Route the cables along the side of the system board toward the front chassis.
c. Connect the cables to the front drive cage backplane.
12. Connect the rest of the drive cables required in this drive configuration. For more information, see
"Storage cabling (on page 83)."
13. Install the drives ("Installing a hot-plug drive" on page 37).
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless
all bays are populated with either a component or a blank.
14. Install the access panel (on page 24).
Vue de la page 40
1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 141 142

Commentaires sur ces manuels

Pas de commentaire