Hp ProLiant DL385p Gen8 Server Manuel d'utilisateur télécharger pdf (Page 29)

Operations 29

If a full-length expansion board is installed in slot 1, release the full-length expansion board retainer,

and then remove the primary PCIe riser cage.

6. If a full-length expansion board is installed in slot 4, release the full-length expansion board retainer,

and then remove the secondary PCIe riser cage.

7. Remove the full-length expansion board.

To install the component, reverse the removal procedure.

Remove the primary PCIe riser cage

CAUTION: To prevent damage to the server or expansion boards, power down the server and

remove all AC power cords before removing or installing the PCIe riser cage.

1. Power down the server (on page 23).

2. Remove all power:

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 134 135

Pas de commentaire

Hp ProLiant DL385p Gen8 Server Manuel d'utilisateur Page 29