Hp ProLiant ML10 Server Manuel d'utilisateur télécharger pdf (Page 13)

Operations 13

Press the Power On/Standby button.

The server powers down and enters standby mode. The system power LED changes from green to

amber. Power is still applied to the server.

2. Disconnect the power cord from the power source.

3. Disconnect the power cord from the server.

4. Place the server on its side.

5. Unfasten the T-15 screw securing the access panel, and then slide the panel towards the rear of the

server.

Remove the front bezel

The front bezel must be opened to access the drive cage and media bays. The bezel must remain closed

during normal server operation.

1. Press the Power On/Standby button.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 75 76

Pas de commentaire

Hp ProLiant ML10 Server Manuel d'utilisateur Page 13