Hp ProLiant ML310e Gen8 Server Manuel d'utilisateur télécharger pdf (Page 37)

Hardware options installation 37

19.

Power up the server (on page 18).

Eight-bay SFF hot-plug drive cage option

To install the component:

1. Power down the server (on page 18).

2. Remove all power:

a. Disconnect each power cord from the power source.

b. Disconnect each power cord from the server.

3. Remove the tower bezel (on page 19).

4. Remove the access panel (on page 20).

5. Remove the air baffle (on page 21).

6. Remove all installed drives.

7. Disconnect the drive cage cables:

a. Disconnect the Mini-SAS cable from the system board.

b. Disconnect the drive power cable from the 10-pin power supply connector.

8. Remove the LFF drive cage assembly.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 106 107

User Guide 1
Contents 3
Contents 4 4
Contents 5 5
Contents 6 6
Component identification 7
Front panel LEDs and buttons 8
Rear panel components 9
Rear panel LEDs and buttons 10
System board components 11
System maintenance switch 12
DIMM slot locations 12
NMI header 13
Drive numbering 14
Drive LED definitions 15
FBWC module LED definitions 16
Fan locations 17
T-10/T-15 Torx screwdriver 17
Operations 18
Unlock the tower bezel 19
Remove the tower bezel 19
Install the tower bezel 19
Remove the access panel 20
Install the access panel 21
Remove the air baffle 21
Install the air baffle 22
Lock the tower bezel 23
Rack planning resources 24
Optimum environment 24
Temperature requirements 25
Power requirements 25
Server warnings and cautions 26
Rack warnings 26
Installing hardware options 27
Registering the server 29
Introduction 30
Drive options 30
Installing a hot-plug drive 32
Drive cage options 33
Controller options 39
Optical drive option 42
Remove the media bay blank 43
Remove the EMI shield 43
Memory options 44
HP SmartMemory 45
DIMM identification 45
ECC memory 46
Installing a DIMM 47
Expansion board options 48
Install the expansion board 50
RPS enablement option 57
Cabling 61
Hot-plug, SATA drive support 62
Eight-bay SFF drive cabling 63
Media drive cabling 64
Power supply cabling 65
Capacitor pack cabling 66
Server mode 67
Server QuickSpecs 67
HP iLO Management Engine 67
Active Health System 68
Intelligent Provisioning 69
HP Insight Diagnostics 70
Erase Utility 70
Scripting Toolkit 71
HP Service Pack for ProLiant 72
HP ROM-Based Setup Utility 72
Using RBSU 73
Auto-configuration process 73
Utilities and features 74
ROMPaq utility 76
Automatic Server Recovery 76
USB support 76
Redundant ROM support 76
Keeping the system current 77
ProLiant Servers 78
Troubleshooting 79
System battery replacement 80
FCC rating label 82
Modifications 83
• EMC Directive 2004/108/EC 84
Japanese notice 85
BSMI notice 85
Korean notice 85
Chinese notice 86
Ukraine notice 86
Laser compliance 86
Battery replacement notice 87
Schalldruckpegel L 88
< 70 dB(A) 88
Electrostatic discharge 89
Specifications 90
Specification Value 91
Support and other resources 92
Customer Self Repair 94
Reparo feito pelo cliente 96
Acronyms and abbreviations 100
Documentation feedback 104
Index 105 105
Index 106 106
Index 107 107

Commentaires sur ces manuels

Pas de commentaire

Hp ProLiant ML310e Gen8 Server Manuel d'utilisateur Page 37

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel informatique Hp ProLiant ML310e Gen8 Server