Hp ProLiant WS460c Gen8 Graphics Server Blade Manuel d'utilisateur télécharger pdf (Page 11)

Component identification 11

System maintenance switch

Position Default Function

Off Off = iLO 4 security is enabled.

On = iLO 4 security is disabled.

Off

Off = System configuration can be

changed.

On = System configuration is locked.

Off Reserved

Off Off = Power-on password is enabled.

On = Power-on password is disabled.

Off Off = No function

On = ROM reads system configuration

as invalid.

— Reserved

S10

— Reserved

S11

— Reserved

S12

— Reserved

To access the redundant ROM, set S1, S5, and S6 to on.

When the system maintenance switch position 6 is set to the On position, the system is prepared to erase all

system configuration settings from both CMOS and NVRAM.

CAUTION: Clearing CMOS and/or NVRAM deletes configuration information. Be sure to

properly configure the server or data loss could occur.

Mezzanine connector definitions

Item PCIe

Mezzanine connector 1

x16, Type A mezzanine card only

Mezzanine connector 2*

x16, Type A or B mezzanine card

*When installing a mezzanine option on mezzanine connector 2, processor 2 must be installed.

DIMM slot locations

DIMM slots are numbered sequentially (1 through 8) for each processor. The supported AMP modes use the

alpha assignments for population order, and the slot numbers designate the DIMM slot ID for spare

replacement.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 97 98

Pas de commentaire

Hp ProLiant WS460c Gen8 Graphics Server Blade Manuel d'utilisateur Page 11