Hp Server tc3100 series Manuel d'utilisateur télécharger pdf (Page 36)

Chapter 4 Setting Up the Remote Connection

7. Click the "TCP/IP Settings" button (see Figure 4-10). Select the "Server

assigned IP address" option. The client will automatically get an IP

Address from the HP Server Remote Management Card. Check "Specify

name server addresses" and make sure all DNS and WINS entry fields are

set to zero (0). Uncheck "Use default gateway on remote network."

Click OK.

NOTE The card derives the address using the PPP IP address of the

card which it increments by "1". If the resulting address is

equal to "0" or "255," it is incremented by "1" again.

Figure 4-10. Define TCP/IP Settings

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 120 121

Pas de commentaire

Hp Server tc3100 series Manuel d'utilisateur Page 36