Hp TC2120 Manuel d'utilisateur Page 57

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 125
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 56
51
Chapter 3 Installing and Configuring
System Board Jumper/Dip Switch Settings
You need to change dip switch settings to clear the CMOS or passwords, perform a hardware flash or BIOS
recovery, or when you upgrade from a 400 MHz to 533 MHz processor. The FSB jumper switch must also be
moved when you upgrade to a higher speed processor. The following illustrations indicate switch locations and
default settings.
Figure 3-25. Location of Jumper and Dip Switches
Figure 3-26. Configuration Switch Positions
Configuration
Switches
Reserved Switches
Jumper Switch
Hardware Flash Protection (Enable flash protection when On. Default = Off)
Reserved (Do not change default setting)
Clear CMOS (Active when On. Default = Off)
BIOS Recovery ( Active when On. Default = Off)
Clear Password ( Active when On. Default = Off)
Reserved (Do not change default setting)
Reserved (Do not change default setting
)
Reserved (Do not change default setting)
On (black indicates switch setting)
Vue de la page 56
1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 124 125

Commentaires sur ces manuels

Pas de commentaire