Hp DV3 Manuel d'utilisateur télécharger pdf (Page 90)

4–28 Maintenance and Service Guide

Removal and replacement procedures

2. Turn the computer display-side up with the front toward you.

3. Open the computer as far as possible.

4. Lift the rear edge of the keyboard 1 until it rests at an angle.

5. Slide the keyboard 2 toward the display until the tabs on the front edge of the keyboard are clear of the

openings in the top cover.

6. Swing the rear edge of the keyboard 3 up and forward until it rests upside down on the top cover.

7. Release the zero insertion force (ZIF) connector 1 to which the keyboard cable is attached, and disconnect

the keyboard cable 2 from the system board.

8. Remove the keyboard.

Reverse this procedure to install the keyboard.

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 181 182

Pas de commentaire

Hp DV3 Manuel d'utilisateur Page 90