HP ep7100 Series Manuel d'utilisateur télécharger pdf (Page 54)

54 User’s Guide

Installing permanently

Power and status functions

Command Parameters Description

SHDN

None Puts the projector into cool-down state,

and later into standby state. The

projector sends a notification when it

enters cool-down state (STAT=3), and

another when it enters standby state

(STAT=0). This keyword requires the

projector to be in its on state (STAT=1).

✎

Do not send any requests other

than STAT in the time between

the cool-down and standby state

notifications. Otherwise,

unexpected results can occur.

W or WAKE

None Puts the projector into warm-up state,

and later into on state. The projector

sends a notification when it enters

warm-up state (STAT=2), and another

when it enters the on state (STAT=1).

This keyword requires the projector to

be in standby state (STAT=0).

✎

Do not send any requests other

than STAT in the time between

the warm-up and on state

notifications. Otherwise,

unexpected results can occur.

STAT

? Queries the projector's current state:

0=standby state (off), 1=on, 2=warm-up

state, 3=cool-down state, 4=audio-only

state.

ALERT

Not a request Notifies when a system alert condition

occurs: 0=lamp life warning, 1=lamp life

reached, 2=lamp faulty, 3=lamp

problem, 4=internal temperature too

high, 5=fan problem, 6=ambient

temperature too high, 7=color wheel

problem, 8=lamp cover open.

✎

ALERT is sent only by the

projector, and cannot be used in

requests.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 83 84

Commentaires sur ces manuels

Pas de commentaire

HP ep7100 Series Manuel d'utilisateur Page 54

Commentaires sur ces manuels

Produits connexes et manuels pour Projecteurs de données HP ep7100 Series