Hp E1367A Manuel d'utilisateur télécharger pdf (Page 18)

Caution CENTER CONDUCTOR MAY SHORT TO SHIELD. Each

channel’s center conductor may momentarily short to the

shield when the channel is opened or closed. Use only

resistive (50Ω or 75Ω) or current-limited (<1 A) inputs with less

than 0.1 µF total capacitance.

Caution STATIC-SENSITIVE DEVICE. Use anti-static procedures when

removing, configuring, and installing a module. The

multiplexer modules are susceptible to static discharges. Do

not install a multiplexer without its metal shield attached.

Connecting User Inputs

User inputs to the RF multiplexers are made through user-supplied male BNC

connectors to the female BNC connectors on the modules. Figure 2-1 shows

the multiplexer female BNC connectors and associated channel numbers.

Figure 2-1. BNC Connector Locations

18 Configuring the HP E1366A/E1367A RF Multiplexers Chapter 2

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 73 74

Pas de commentaire

Hp E1367A Manuel d'utilisateur Page 18