Hp E1367A Manuel d'utilisateur télécharger pdf (Page 51)

SCAN [ROUTe:]SCAN <channel_list> defines the channels to be scanned. The

channel_list has the form (@ccnn) where cc = card number (01-99) and

nn = channel number (00-03 and 10-13).

Parameters

Parameter Name Parameter Type Range of Values

<channel_list>

numeric cc00-cc03, cc10-cc13

Comments • Defining Scan List: When executing [ROUTe:]SCAN, the channel

list is checked for valid card and channel numbers. An error is

generated for an invalid channel list.

• Scanning Channels: You can scan single channels (@ccnn);

multiple channels (@ccnn,ccnn,...); sequential channels

(@ccnn:ccnn); groups of sequential channels

(@ccnn:ccnn,ccnn:ccnn); or any combination.

• Scanning Operation: When a valid channel list is defined,

INITiate[:IMMediate] begins the scan and closes the first channel in

the channel list. Successive triggers from the source specified by

TRIGger:SOURce advances the scan through the channel list.

• Stopping Scan: See the ABORt command.

• Related Commands: TRIGger, TRIGger:SOURce

• *RST Condition: All channels open.

Example Scanning Using External Devices

See Chapter 4, “Example: Scanning With External Device” or “Example:

Scanning Using "Trig Out" and "Event In" Ports” for example scanning

programs using external instruments.

Chapter 5 HP E1366A/E1367A RF Multiplexers Command Reference 51

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 73 74

Pas de commentaire

Hp E1367A Manuel d'utilisateur Page 51