HP Omnibook XE3 Manuel d'utilisateur Page 37

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 116
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 36
HP OmniBook XE3 Removal and Replacement 2-9
Removing the Keyboard Cover (with Hinge Covers)
(User-Replaceable)
Required Equipment
Small Phillips screwdriver.
Small flat-blade screwdriver.
Removal Procedure
1. Unplug the AC adapter, if present, and remove the battery.
2. Close the display, and remove both screws from the backs of the hinge covers.
Figure 2-6. Removing the Keyboard Cover Retaining Screws
3. Open the notebook’s display 180°, so that it lays flat.
4. Use the flat-blade screwdriver to carefully pry up the inside edges of the hinge covers until the
cover pops loose, then lift the cover off.
Screws,
M2.5x4 mm
(
2
)
Vue de la page 36
1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 115 116

Commentaires sur ces manuels

Pas de commentaire