HP Ethernet BL-c Switch Manuel d'utilisateur télécharger pdf (Page 47)

Performing a serial download 47

Depending on the selection, 1 or 2, the system updates image1 or image2 on the flash and a

message with a progress indicator displays as shown below. If selecting n, the system aborts the

update procedure and prompts to reset the baud rate and power cycle the switch.

11. Change the baud rate to 9600 and power off the switch. Wait for a few seconds, and power on the

switch.

During bootup the switch the following prompt appears:

To use the other operating system image, press the Ctrl-o keys.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 65 66

Pas de commentaire

HP Ethernet BL-c Switch Manuel d'utilisateur Page 47