HP 10BASE-T Guide de l'utilisateur télécharger pdf (Page 34)

Using a Direct Serial Connection

The out-of-band management port on the hub is a 9-pin serial (RS-232-C)

port used to connect the hub to the personal computer or terminal. Note

that you must have an HP Ethernet SNMP Module installed in the hub

to use the ASCII console.

To connect to the PC or terminal through the out-of-band management

port:

1. Attach the console cable (5182-4794) supplied with the hub to the

out-of-band management port on the front of the hub. Attach the

other end of the serial cable to an available 9-pin serial port on the

personal computer or 25-pin serial port on the terminal. If only a

25-pin serial port is available, use a 9-pin-to-25-pin port adapter

(not supplied).

2. For HP Stack Manager, define the out-of-band port’s data commu-

nication settings using the “Communications Settings” function in

HP Stack Manager. See the HP Stack Manager online help for more

information.

serial cable for connecting

a PC or terminal to the

console port

(p/n 5182-4794)

PC running

HP Stack Manager or

a terminal emulator

Installing the

HP AdvanceStack Hubs

Installing the HP AdvanceStack 10Base-T Hubs

1-21

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 135 136

Pas de commentaire

HP 10BASE-T Guide de l'utilisateur Page 34