HP 10BASE-T Guide de l'utilisateur télécharger pdf (Page 36)

3. Connect the “local modem” to the serial port on your PC or install it

in the PC if it is an internal modem, and configure that modem by

using the “Local Modem” initialization screen in HP Stack Manager.

4. From the “Communications” screen under the “Settings” menu, click

on the Modem button and enter the phone number of the remote

modem.

5. From the main screen click on the “Connect” button to establish the

communication connection between the two modems. Once the

connection is established, the hub or stack of hubs will be displayed

on the HP Stack Manager’s main screen.

See the HP Stack Manager online help for more specific instructions.

Installing the

HP AdvanceStack Hubs

Installing the HP AdvanceStack 10Base-T Hubs

1-23

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 135 136

Pas de commentaire

HP 10BASE-T Guide de l'utilisateur Page 36