HP 3PAR Guide de l'utilisateur télécharger pdf (Page 19)

Table 10 Raised Floor Specifications

ValueSpecification

Less than 0.06 in. (1.5 mm)

Less than 0 .10 in. (2.5 mm)

Flatness tolerance

Per 10 ft (3 m) span

Overall

Less than 0.15 in. (3.8 mm)

Less than 0.02 in. (0.5 mm)

Deflection

Dynamic

Permanent

At least 5,000 lb (2,268 kg)

At least 30 ft-lb (40.7 N-m)

Pedestal assembly load

Axial

Side

Placing each storage system cabinet across two floor tiles is strongly recommended. It is also

strongly recommended that a vented floor tile be placed in front of each cabinet. Figure 6 (page 19)

shows two storage systems side-by-side, each resting across two floor tiles.

Figure 6 Adjacent Cabinets Placed Across Two Floor Panels Each (Recommended)

When necessary, a storage system can also rest across four floor tiles, with two adjacent storage

systems resting partially on the same tiles so that they use a total of six tiles, as shown in Figure 7

(page 19). Again, it is strongly recommended to have vented tiles in the front.

Figure 7 Storage Systems Resting Partially on the Same Floor Panels

Establishing the Proper Foundation 19

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 52 53

Pas de commentaire

HP 3PAR Guide de l'utilisateur Page 19